dc.contributor.author | Küçükömeroğlu, Tevfik | |
dc.contributor.author | Aktarer, Semih Mahmut | |
dc.contributor.author | İpekoğlu, Güven | |
dc.contributor.author | Cam, Gürel | |
dc.date.accessioned | 2020-12-19T19:41:03Z | |
dc.date.available | 2020-12-19T19:41:03Z | |
dc.date.issued | 2018 | |
dc.identifier.citation | Küçükömeroğlu, T., Aktarer, S.M., İpekoğlu, G., Çam, G. (2018). Microstructure and mechanical properties of friction-stir welded St52 steel joints. International Journal of Minerals, Metallurgy and Materials, 25 (12), pp. 1457-1464. https://doi.org/10.1007/s12613-018-1700-x | en_US |
dc.identifier.issn | 1674-4799 | |
dc.identifier.issn | 1869-103X | |
dc.identifier.uri | https://doi.org/10.1007/s12613-018-1700-x | |
dc.identifier.uri | https://hdl.handle.net/11436/1713 | |
dc.description | Kucukomeroglu, Tevfik/0000-0002-4392-9966; Aktarer, Semih Mahmut/0000-0001-5650-7431 | en_US |
dc.description | WOS: 000452499400011 | en_US |
dc.description.abstract | The aim of this work is to investigate the mechanical properties and microstructures of friction-stir welded (FSWed) St52 structural steel joints. in this study, St52 steel plates with a thickness of 4 mm were butt-welded by friction-stir welding (FSW) using a tungsten carbide tool having a conical pin. the microstructure of the welded zone consists of equiaxed fine ferrite, grain boundary ferrite, Widmanstatten ferrite, and aggregates of ferrite + cementite. the microhardness measurements showed that the hardness of the welded zone was significantly higher than that of the base metal. the FSWed St52 joint exhibited a significant strength overmatching in the weld region and a strength performance similar to or slightly higher than that of the base plate. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Springer | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Friction-stir welding | en_US |
dc.subject | St52 steel | en_US |
dc.subject | Microstructure | en_US |
dc.subject | Mechanical properties | en_US |
dc.title | Microstructure and mechanical properties of friction-stir welded St52 steel joints | en_US |
dc.type | article | en_US |
dc.contributor.department | RTEÜ, Teknik Bilimler Meslek Yüksekokulu, Motorlu Araçlar ve Ulaştırma Teknolojileri Bölümü | en_US |
dc.contributor.institutionauthor | Aktarer, Semih Mahmut | |
dc.identifier.doi | 10.1007/s12613-018-1700-x | |
dc.identifier.volume | 25 | en_US |
dc.identifier.issue | 12 | en_US |
dc.identifier.startpage | 1457 | en_US |
dc.identifier.endpage | 1464 | en_US |
dc.relation.journal | International Journal of Minerals Metallurgy and Materials | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |