dc.contributor.author | Gömöry, Fedor | |
dc.contributor.author | İnanır, Fedai | |
dc.date.accessioned | 2020-12-19T20:16:36Z | |
dc.date.available | 2020-12-19T20:16:36Z | |
dc.date.issued | 2012 | |
dc.identifier.citation | Gömöry, F. & İnanır, F. (2012). AC losses in coil wound from round wire coated by a superconducting layer. IEEE Transactions on Applied Superconductivity, 22(3), 4704704. https://doi.org/10.1109/TASC.2011.2174579 | en_US |
dc.identifier.issn | 1051-8223 | |
dc.identifier.uri | https://doi.org/10.1109/TASC.2011.2174579 | |
dc.identifier.uri | https://hdl.handle.net/11436/4226 | |
dc.description.abstract | Numerical simulations have been performed in order to predict the behavior of a round wire covered by thin superconducting layer when exposed to AC magnetic field or transporting AC current, as well as for a solenoid coil made from such wire. It was found that the AC loss of a single coated round wire is in good agreement with the predictions based on the existing analytical results for a hollow superconducting cylinder. AC loss in the coil shows two regimes. At low currents it is lower than in the case of the coil made from a full round wire with the same critical current and outer radius. In the range of currents comparable to the critical current the loss superseded the values expected for the reference coil from full wire. These results indicate, that the use of coated round wires instead of full ones does not offer a significant advantage from the point of view of AC loss in a coil winding. © 2011 IEEE. | en_US |
dc.description.sponsorship | Vedecká Grantová Agentúra MŠVVaŠ SR a SAV: 2/0172/09 European Commission: FU07-CT-2007-00051 | en_US |
dc.description.sponsorship | Manuscript received September 08, 2011; accepted October 24, 2011. Date of publication November 03, 2011; date of current version May 24, 2012. This work was supported in part by the European Commission under the EURATOM contract FU07-CT-2007-00051 and the VEGA agency Grant 2/0172/09 as well as the TUBITAK Grant supporting the stay of Fedai Inanir in Bratislava. F. Gömöry is with the Institute of Electrical Engineering, Slovak Academy of Sciences, 84104 Bratislava, Slovakia (e-mail: elekgomo@savba.sk). F. Inanir is with the Department of Physics, Rize University, 53100, Rize, Turkey. Color versions of one or more of the figures in this paper are available online at http://ieeexplore.ieee.org. Digital Object Identifier 10.1109/TASC.2011.2174579 Fig. 1. Two kinds of superconducting wires used in the calculations. Interior part of CRW is considered as non-conducting and non-magnetic material. | en_US |
dc.language.iso | eng | en_US |
dc.publisher | IEEE | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | AC loss | en_US |
dc.subject | coated conductors | en_US |
dc.subject | coated round wire | en_US |
dc.subject | superconducting coils | en_US |
dc.title | AC losses in coil wound from round wire coated by a superconducting layer | en_US |
dc.type | article | en_US |
dc.contributor.department | RTEÜ, Fen - Edebiyat Fakültesi, Fizik Bölümü | en_US |
dc.contributor.institutionauthor | İnanır, Fedai | |
dc.identifier.doi | 10.1109/TASC.2011.2174579 | |
dc.identifier.volume | 22 | en_US |
dc.identifier.issue | 3 | en_US |
dc.relation.journal | IEEE Transactions on Applied Superconductivity | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |