dc.contributor.author | Hekimoğlu, Ali Paşa | |
dc.contributor.author | Turan, Yunus Emre | |
dc.date.accessioned | 2020-12-19T20:28:57Z | |
dc.date.available | 2020-12-19T20:28:57Z | |
dc.date.issued | 2019 | |
dc.identifier.issn | 2146-538X | |
dc.identifier.issn | 2146-538X | |
dc.identifier.uri | https://doi.org/10.17714/gumusfenbil.381050 | |
dc.identifier.uri | https://app.trdizin.gov.tr/makale/TXpFeE1UUXhNUT09 | |
dc.identifier.uri | https://hdl.handle.net/11436/5104 | |
dc.description.abstract | Bu çalışmada ağırlıkça %5 ile 50 arasında farklı oranlarda çinko içeren on adet ikili alüminyum-çinko alaşımı kokil kalıba döküm yöntemiyle üretildi. Üretilen alaşımların içyapıları ışık mikroskobunda incelendi. Alaşımların içyapısında bulunan fazları belirlemek için X-ışını kırınım (XRD) çalışmaları yapıldı. Elde edilen bulgular % 15 çinko oranına kadar alaşımların içyapısının alüminyumca zengin ? fazından oluştuğunu ve alaşımdaki çinkonun bu faz içinde tamamen çözündüğünü göstermektedir. Çinko oranı % 15’i aştığında ? fazının yanı sıra yapıda çinkoca zengin ? fazının oluşmaya başladığı, %25’i aşması durumunda ise ? fazının dendritik bir şekilde büyüdüğü görüldü. Alaşımların sertlik değerlerinin artan çinko oranı ile sürekli arttığı, çekme ve basma dayanımı değerlerinin ise %30 çinko oranına kadar arttığı bu orandan sonra azaldığı görüldü. Artan çinko oranı ile alaşımların içyapısında meydana gelen değişimler katılaşma davranışlarına, mekanik özelliklerinde meydana gelen değişimler ise yapısal değişimlere dayandırılarak irdelendi. | en_US |
dc.description.abstract | In this study, ten binary aluminum-zinc alloys containing zinc in different ratios between 5 and 50% by weight were produced by permanent mold casting method. The microstructures of the produced alloys were examined in light microscope. X-ray diffraction (XRD) studies were carried out to determine the phases in the microstructure of the alloys. The findings show that the microstructure of the alloys up to 15% zinc is composed of aluminum-rich ? phase and the zinc in the alloy completely dissolves in this phase. It was also showed that when the zinc content exceeds 15%, besides the ?-phase, the zinc-rich ? phase begins to form, and when the zinc content exceeds 25%, the ?-phase grows dendritically. The hardness, tensile, and compression strength values of the alloys increased continuously with increasing zinc content but after the % 30 zinc content tensile and compression strength values decreased. The changes in the microstructure and mechanical properties of the alloys were discussed based on their solidification behaviors and structural changes. | en_US |
dc.language.iso | tur | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Tarımsal Ekonomi ve Politika | en_US |
dc.subject | Ziraat Mühendisliği | en_US |
dc.subject | Bitki Bilimleri | en_US |
dc.title | Çinko Oranının Al-(5-50)Zn Alaşımlarının Yapısal ve Mekanik Özelliklerine Etkisi | en_US |
dc.title.alternative | Effect of Zinc Content on the Microstructure and Mechanical Properties of the Al-(5-50)Zn Alloys | en_US |
dc.type | article | en_US |
dc.contributor.department | RTEÜ | en_US |
dc.identifier.doi | 10.17714/gumusfenbil.381050 | |
dc.identifier.volume | 9 | en_US |
dc.identifier.issue | 1 | en_US |
dc.identifier.startpage | 16 | en_US |
dc.identifier.endpage | 25 | en_US |
dc.ri.edit | oa | en_US |
dc.relation.journal | Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi | en_US |
dc.relation.publicationcategory | Makale - Ulusal Hakemli Dergi - Kurum Öğretim Eleman | en_US |