• Machining-induced damage and corrosion behavior of monel-400 alloy under cryogenic cooling conditions: A sustainable initiative 

  Demirbaş, Ali; Köklü, Uğur; Morkavuk, Sezer; Giasin, Khaled; Kocaman, Engin; Sarıkaya, Murat (Springer, 2024)

  Monel-400 is a nickel-based heat-resistant superalloy (HRSA) that is primarily used in oil and marine applications. Machining Monel-400 alloy for marine applications usually involves drilling and milling operations for ...

• Divergent chimney and sloping collector design for ground heat source integrated solar chimney power plants 

  Cüce, Erdem (Springer, 2024)

  With energy resources being fossil fuel-based, increasing energy production has already reached levels that threaten human health. In this situation, the use of alternative energy sources is seen as the only solution. Solar ...

• A review on aluminum alloys produced by wire arc additive manufacturing (WAAM): Applications, benefits, challenges and future trends 

  Sarıkaya, Murat; Başcıl Önler, Dilara; Dağlı, Salih; Hartomacıoğlu, Selim; Günay, Mustafa; Królczyk, Grzegorz M. (Elsevier, 2024)

  Metal additive manufacturing is advancing with increasing momentum and attracting great attention. The Wire Arc Additive Manufacturing (WAAM) process, one of the metal additive manufacturing methods, involves melting a ...

• Characterization methods for azobenzene photoisomerization energy storage: A review 

  Zhang, Jun; Zhang, Li; Jin, Guang; Lin, Chenyang; Cüce, Erdem; Guo, Shaopeng (Springer, 2024)

  The development of azobenzene photoisomerization materials marks a pivotal advancement in solar-thermal conversion technologies. Their properties and performance, explored through comprehensive characterization, are vital ...

• Optical power monitoring systems for offshore wind farms: A literature review 

  Mohanty, Sthitapragyan; Ramasamy, A. K.; Mohanty, Asit; Mohanty, Pragyan P.; Soudagar, Manzoore Elahi M.; Khan, T. M. Yunus; Cüce, Erdem (Elsevier, 2024)

  Photonics has become a potential technology for improving power monitoring in offshore wind turbines, providing creative solutions to overcome the difficulties presented by the far and harsh conditions of offshore wind ...

• The impact of heat treatment process on the drilling characteristics of Al–5Si–1Cu–Mg alloy produced by sand casting 

  Bayraktar, Şenol; Alparslan, Cem; Salihoğlu, Nurten; Sarıkaya, Murat (Elsevier, 2024)

  Aluminum–Silicon (Al–Si) based materials are commonly preferred in engineering studies requiring high mechanical performance as an alternative to steel materials. These alloys are especially preferred in the automotive ...

• Flow boiling characteristics in expanding type structured heat sinks for different roles of gravitational force 

  Markal, Burak; Evcimen, Alper (Avestia Publishing, 2024)

  The orientation of the devices that must be cooled can change depending on the application requirements. Orientation-based variations can influence the physical mechanism regarding the coolers. Therefore, here, saturated ...

• Preface 

  Bayraktar, Şenol; Pathak, Sunil (CRC Press, 2024)

  ....

• Green machining of ceramics 

  Ekici, Ergün; Bayraktar, Şenol (CRC Press, 2024)

  Manufacturing is an important part of the production industry and different machining operations are frequently used in this process. Depending on the material type and machining operation, cutting fluids are often used ...

• Environmentally benign machining 

  Bayraktar, Şenol; Pathak, Sunil (CRC Press, 2024)

  This book provides essential information on environmentally benign/sustainable machining processes including innovations and developments in conventional machining, considering economy, safety, and productivity. Developments ...

• CFD analysis of the impact of air gap width on Trombe wall performance 

  Friji, Khaoula; Ghriss, Ons; Bouabidi, Abdallah; Cüce, Erdem; Alshahrani, Saad (Wiley, 2024)

  In recent years, there has been a lot of research and debate on how solar energy can be used instead of conventional sources of heating to power residential heating. In this study, the Trombe wall (TW) technique, based on ...

• Smart grid and application of big data: Opportunities and challenges 

  Mohanty, Asit; Ramasamy A.K.; Verayiah, Renuga; Bastia, Satabdi; Swaroop Dash, Sarthak; Soudagar, Manzoore Elahi M.; Yunus Khan, T.M.; Cüce, Erdem (Elsevier, 2024)

  The rapid technological advancements in the electrical energy sector are generating a significant volume of data that profoundly influences the operations of system operators, grid users, and GENCOs. In this context, Big ...

• Investigation of the effect of symmetrical hybrid stacking on drilling machinability of unidirectional CFRP, GFRP and hybrid composites: Drilling tests and damage analysis 

  Yazman, Şakir; Gemi, Lokman; Morkavuk, Sezer; Köklü, Uğur (Elsevier, 2024)

  Fiber-reinforced plastics are undoubtedly superior to metals in many sectors due to their advantageous properties. Especially carbon fiber reinforced plastics (CFRP) and glass fiber reinforced plastics (GFRP) are widely ...

• Correction to: Anti-solvent materials enhanced structural and optical properties on ambiently fabricated perovskite thin films (Scientific Reports, (2024), 14, 1, (19995), 10.1038/s41598-024-70344-3) 

  Nur-E-Alam, Mohammad; Islam, Mohammad Aminul; Kar, Yap Boon; Kiong, Tiong Sieh; Misran, Halina; Khandaker, Mayeen Uddin; Fouad, Yasser; Soudagar, Manzoore Elahi M.; Cüce, Erdem (Nature Research, 2024)

  Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-024-70344-3, published: 28 August 2024 The original version of this Article contained an error in the Acknowledgments section. The authors extend their ...

• Effect of hybridization and stacking sequence on damage development in AWJ machining of Al/FRP/Al FML composites 

  Doğan, Mehmet Akif; Gemi, Lokman; Yazman, Şakir; Ceritbinmez, Ferhat; Yapıcı, Ahmet (Elsevier, 2024)

  In this study, 5 different Al2024/FRP/Al2024 metal stacked composites were produced and their machinability by abrasive water jet machining (AWJM) method was investigated. Synergistic interaction of these materials offers ...

• Internal or external thermal superinsulation towards low/zero carbon buildings? A critical report 

  Cüce, Pınar Mert; Cüce, Erdem; Alvur, Emre (2023)

  The effort to create low-carbon societies is now more than just a need for a sustainable world. According to the sectoral energy analyses carried out to reduce world energy consumption figures and greenhouse gas emissions, ...

• Impact characteristics of S2-glass fibre/FM94-epoxy composites under high and cryogenic temperatures: Experimental and numerical investigation 

  Al-Azzawi, Ahmad S.M.; Featherston C.A.; Lupton, Colin; Jiang, Chulin; Barouni, Antigoni; Köklü, Uğur; Giasin, Khaled (Elsevier, 2024)

  The aerospace industry uses glass fibre reinforced polymer (GFRP) composites to manufacture structural and non-structural parts of an aircraft as they possess superior strength to weight ratio and exceptional corrosion ...

• Positional health assessment of collaborative robots based on long short-term memory auto-encoder (LSTMAE) network 

  Hasan, Naimul; Webb, Louie; Chinanthai, Malarvizhi Kaniappan; Hossain, Mohammad Al-Amin; Özkat, Erkan Caner; Tokhi, Mohammad Osman; Alkan, Buğra (Springer, 2024)

  Calibration is a vital part of ensuring the safety and smooth operation of any industrial robot and this is particularly essential for collaborative robots as any issue pertaining to safety can adversely impact the human ...

• Impact of support pillars geometry on thermal insulation performance of vacuum glazing: CFD research and exergy analysis 

  Cüce, Pınar Mert; Cüce, Erdem; Şen, Harun (Inderscience Enterprises Ltd., 2024)

  Vacuum glazing technology is based on evacuating the gas between the double glasses and aims to prevent heat losses by eliminating convection effects. This study evaluates the effect of thermal conductivity and column ...

• Effect of zn addition on the structural, mechanical and tribological properties of al12si (en ac 44100) alloy 

  Hekimoğlu, Ali Paşa; Sönmezışık, Ahsen; Zimitoğlu, Süha; Hacıosmanoğlu, Murat; Savaşkan, Temel (Springer, 2024)

  In this study, the effects of 10 wt% Zn addition on the microstructure and properties of Al12Si EN AC 44100 alloy were investigated. For this purpose, EN AC 44100 and EN AC 44100 + 10 wt%Zn alloys were fabricated by permanent ...

Daha Fazla